Emergency Break-Away Coupling for Bottom Hose Loading Applications
Emco Wheaton has introduced a TODO break-away coupling incorporating a TTMA (Tank Truck Manufacturers Association) flange, for the bottom loading of road tankers.
The addition of the 4" TTMA TODO break-away to the loading operation of road tankers gives operators peace of mind knowing that if a drive-away incident occurs, the break-away will disconnect and minimize product lost to virtually zero.
Share
The API coupler and the loading arm will not be damaged and the break-away has the capability of being re-set on site with no need to buy a new piece of equipment or send the break-away to the manufacturer for re-set.
The TTMA flange break-away can be installed on a wide range of bottom hose loading distribution loading arms.
- Body Material: Cast aluminum
- Seal material: Viton / Buna
- Working Pressure: 145 PSI / 10 Bar
- Test Pressure: 217.5 PSI / 15 Bar
- Weight: 24 Lbs / 11 Kg
- Overall Length: 14 inch / 35 cm
- Reaction force during emergency release: 772 Lbs / 350 Kg (at the connection flange of the road tanker)
- Pin size: 3mm (others available on request)
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Learn More
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Learn More
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More
Features
The API coupler and the loading arm will not be damaged and the break-away has the capability of being re-set on site with no need to buy a new piece of equipment or send the break-away to the manufacturer for re-set.
The TTMA flange break-away can be installed on a wide range of bottom hose loading distribution loading arms.
Specifications
- Body Material: Cast aluminum
- Seal material: Viton / Buna
- Working Pressure: 145 PSI / 10 Bar
- Test Pressure: 217.5 PSI / 15 Bar
- Weight: 24 Lbs / 11 Kg
- Overall Length: 14 inch / 35 cm
- Reaction force during emergency release: 772 Lbs / 350 Kg (at the connection flange of the road tanker)
- Pin size: 3mm (others available on request)
Related Products
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Learn More
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Learn More
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More