Swivel Joint - D1133
Our D1133 swivel joint is a variant of the basic D0002. It is the ideal swivel joint for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
In the D1133 swivel joint the ball track is encapsulated by two O-rings, neither dirt from the outside nor product from within (in case of leakage) can reach the ball track. Should the main seal fail, leakage is indicated through the leak detection ports.
Compartir
The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline. The D1133 swivel joint can be relubricated via grease nipples if it is not provided with life time grease. If required, the balls can be removed and replaced by first removing the ball track plug.
The ball track of the steel version is hardened and polished. This gives the swivel joint a high degree of running precision and long service life, even under extreme loads. The sealing surfaces are plated with stainless steel and precision-finished to prevent corrosion, ensuring that the seal that slides along these sealing surfaces is not damaged and will seal perfectly.
The D1133 swivel joint in stainless steel is used for applications where aggressive media are encountered internally and externally, and therefore the internal parts as well as the external parts are made of stainless steel. Depending on the expected load the ball track can be hardened or unhardened. If hardened, a special alloy is welded into the raw material before mechanical processing.
Normal attitude horizontal or vertical.
Material:
- Stainless steel
- Carbon steel
- Stainless steel/Unhardened ball track
- Stainless steel/Hardened ball track
Seal Material:
- Perbunan
- Viton
- PTFE
- Special compounds
Allowable internal pressure (gauge pressure):
- Operational - 25 bar
- 10 bar to 40 bar (dependent on size/material/seal material)
- Test pressure - 37.5 bar
- 15 bar to 60 bar (dependent on size/material/seal material)
Allowable temperature range:
- -50° C to + 250° C
Â
Weight:
- DN 50
- DN 80
- DN 100
- DN 150
- DN 200
- DN 250
- DN 300
- DN 400
- (Weights and dimensions for larger swivel joints available on request)
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Aprende Más
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Aprende Más
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Aprende Más
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Aprende Más
SWIVEL JOINTS
Swivel joints are designed to minimise torque stress on a hose while also permitting free movement.
Learn More
Specifications
The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline. The D1133 swivel joint can be relubricated via grease nipples if it is not provided with life time grease. If required, the balls can be removed and replaced by first removing the ball track plug.
The ball track of the steel version is hardened and polished. This gives the swivel joint a high degree of running precision and long service life, even under extreme loads. The sealing surfaces are plated with stainless steel and precision-finished to prevent corrosion, ensuring that the seal that slides along these sealing surfaces is not damaged and will seal perfectly.
The D1133 swivel joint in stainless steel is used for applications where aggressive media are encountered internally and externally, and therefore the internal parts as well as the external parts are made of stainless steel. Depending on the expected load the ball track can be hardened or unhardened. If hardened, a special alloy is welded into the raw material before mechanical processing.
Normal attitude horizontal or vertical.
Variants
Material:
- Stainless steel
- Carbon steel
- Stainless steel/Unhardened ball track
- Stainless steel/Hardened ball track
Seal Material:
- Perbunan
- Viton
- PTFE
- Special compounds
Allowable internal pressure (gauge pressure):
- Operational - 25 bar
- 10 bar to 40 bar (dependent on size/material/seal material)
- Test pressure - 37.5 bar
- 15 bar to 60 bar (dependent on size/material/seal material)
Allowable temperature range:
- -50° C to + 250° C
Â
Weight:
- DN 50
- DN 80
- DN 100
- DN 150
- DN 200
- DN 250
- DN 300
- DN 400
- (Weights and dimensions for larger swivel joints available on request)
Related Products
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Aprende Más
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Aprende Más
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Aprende Más
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Aprende Más
SWIVEL JOINTS
Swivel joints are designed to minimise torque stress on a hose while also permitting free movement.
Learn More