Boom Top Loaders
Boom Loaders are the most versatile of all top loading arms to handle all media and allow for the greatest reach.
They are suitable for the top loading of road or rail tankers where the manhole cannot be accurately positioned. These arms are equipped with an additional swivel joint to ensure the flange connection remains horizontal when coupling to road or railcar tankers.
Boom loaders are most commonly paired with a Vapor Return Hose used for hydrocarbons (e.g. gasoline), toxic, and aggressive media. By loading with a vapor return hose, the product vapor will be recovered through the loading arm. This improves the profitability of the terminal because vaporized product can be recovered and vapor does not pollute the environment. By loading with a sealed manhole, a high level of protection is achieved for both the operator and the environment.
Due to its strong design, this loading arm can be equipped with all required accessories.
Because of the robust and high quality design of the D2000 swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.
Compartir
US
Sizes:
- 2" - 6"
Materials of Arm Construction:
- Carbon steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
- PTFE Lined
Materials of Optional Accessories:
- D2000 Swivels
- TODO
- Lockdown Device
- Vapor/Splash Plates, SST & Alum, Viton
- Vapor Cone, SST & Alum, Viton
- Cone Deflector, SST & Alum
- Tee Deflector, SST & Alum
- Heat tracing / Insulation
- Steam Jacketing
- Level sensor
- Parallel Device
- Position Stops
- Proximity Switch
ROM:
- +50° to -10°
Seals:
- Viton
- Buna/Nitrile
- PTFE & Equivalents
- *More options upon request
Balancing Method:
- Spring Cylinder
- Pneumatic
Design Pressure:
- Based on flanges and accessories
- Typical – 150 psi
- *Higher pressure ratings available but cannot exceed 580 PSI
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical Range: 5F to 266 F
- Broader temperature ranges available
Suggested Applications/Mediums:
- Splash Loading
- Multiple compartment tanks
- Tight seal / vapor recovery
- Chemical / Acids
- Sulphur
- Asphalt
- Long Reach
EW US Part Number:
- E2022
- E2025
Europe
Sizes:
- DN 50-150
Materials of Arm Construction:
- Carbon Steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
- PTFE Lined
Materials of Optional Accessories:
- D2000 Swivels
- TODO
- Lockdown Device
- Vapor/Splash Plates, SST & Alum, Viton
- Vapor Cone, SST & Alum, Viton
- Cone Deflector, SST & Alum
- Tee Deflector, SST & Alum
- Heat tracing / Insulation
- Steam Jacketing
- Level sensor
- Parallel Device
- Position Stops
- Proximity Switch
ROM:
- +60° to -45°
Seals:
- Viton Grade A
- Buna/Nitrile
- PTFE & Equivalents
- FVMQ
- Fluoroloy-A08
- Food Grade (FDA conform)
- *More options upon request
Balancing Method:
- Spring Cylinder
- Pneumatic
- Hydraulic
Design Pressure:
- Based on flanges and accessories.
- Typical is PN 10-16
- *Higher pressure ratings available but cannot exceed 40 barg
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical range: -50C to 250C
- Broader temperature ranges available
Suggested Applications/Mediums:
- Splash Loading
- Multiple compartment tanks
- Tight seal / vapor recovery
- Chemical / Acids / Lye
- Sulphur
- Asphalt / Bitumen
- Long Reach
- Mineral Oil
- Gasoline / Diesel
- Liquid Foods (Beer, Whiskey, Chocolate)
EW Germany Part Number:
- E2630
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
TODO-MATIC
Dry-break coupling available in 1-6” sizes. Ideal for transferral of oil, gas and petrochemicals. Minimal residual loss and zero leakage.
Learn More
TODO-GAS
Available in 1-3” sizes, these units are ideal for the safe transfer of LPG in liquid and vapour phases.
Learn More
NGX BreakAway Coupling
The NGX breakaway coupling designed to eliminate spillages and damage to equipment when operators fail to disengage a line.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Aprende Más
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Aprende Más
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Aprende Más
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Aprende Más
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Aprende Más
Specifications
US
Sizes:
- 2" - 6"
Materials of Arm Construction:
- Carbon steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
- PTFE Lined
Materials of Optional Accessories:
- D2000 Swivels
- TODO
- Lockdown Device
- Vapor/Splash Plates, SST & Alum, Viton
- Vapor Cone, SST & Alum, Viton
- Cone Deflector, SST & Alum
- Tee Deflector, SST & Alum
- Heat tracing / Insulation
- Steam Jacketing
- Level sensor
- Parallel Device
- Position Stops
- Proximity Switch
ROM:
- +50° to -10°
Seals:
- Viton
- Buna/Nitrile
- PTFE & Equivalents
- *More options upon request
Balancing Method:
- Spring Cylinder
- Pneumatic
Design Pressure:
- Based on flanges and accessories
- Typical – 150 psi
- *Higher pressure ratings available but cannot exceed 580 PSI
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical Range: 5F to 266 F
- Broader temperature ranges available
Suggested Applications/Mediums:
- Splash Loading
- Multiple compartment tanks
- Tight seal / vapor recovery
- Chemical / Acids
- Sulphur
- Asphalt
- Long Reach
EW US Part Number:
- E2022
- E2025
Europe
Sizes:
- DN 50-150
Materials of Arm Construction:
- Carbon Steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
- PTFE Lined
Materials of Optional Accessories:
- D2000 Swivels
- TODO
- Lockdown Device
- Vapor/Splash Plates, SST & Alum, Viton
- Vapor Cone, SST & Alum, Viton
- Cone Deflector, SST & Alum
- Tee Deflector, SST & Alum
- Heat tracing / Insulation
- Steam Jacketing
- Level sensor
- Parallel Device
- Position Stops
- Proximity Switch
ROM:
- +60° to -45°
Seals:
- Viton Grade A
- Buna/Nitrile
- PTFE & Equivalents
- FVMQ
- Fluoroloy-A08
- Food Grade (FDA conform)
- *More options upon request
Balancing Method:
- Spring Cylinder
- Pneumatic
- Hydraulic
Design Pressure:
- Based on flanges and accessories.
- Typical is PN 10-16
- *Higher pressure ratings available but cannot exceed 40 barg
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical range: -50C to 250C
- Broader temperature ranges available
Suggested Applications/Mediums:
- Splash Loading
- Multiple compartment tanks
- Tight seal / vapor recovery
- Chemical / Acids / Lye
- Sulphur
- Asphalt / Bitumen
- Long Reach
- Mineral Oil
- Gasoline / Diesel
- Liquid Foods (Beer, Whiskey, Chocolate)
EW Germany Part Number:
- E2630
Accessories
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Aprende Más
TODO-MATIC
Dry-break coupling available in 1-6” sizes. Ideal for transferral of oil, gas and petrochemicals. Minimal residual loss and zero leakage.
Learn More
TODO-GAS
Available in 1-3” sizes, these units are ideal for the safe transfer of LPG in liquid and vapour phases.
Learn More
NGX BreakAway Coupling
The NGX breakaway coupling designed to eliminate spillages and damage to equipment when operators fail to disengage a line.
Learn More
Related Products
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Aprende Más
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Aprende Más
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Aprende Más
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Aprende Más
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Aprende Más