Spot Loading System
Our Spot Loading System is an automatic loading system with manhole detection.
It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
The position of the manhole is detected by a CCD-Camera and an ultra sonar sensor and its coordinates are stored in the CPU (Central Processing Unit). From this information the drop tube will automatically drive to the manhole.
Compartir
The system can run hydraulically or electrically. The correct connection will be supervised by a Connection Detection System which is works with a proximity switch.
The filling process will be released from the customer's control room. Overfill of the tank is prevented by an Overfill Safety Device. The CPU includes a PLC (Programmable Logic Controller) system.
- Chemical applications
- System can be run hydraulically or electrically
- Correct connection is supervised by a connection detection system using a proximity switch
- Filling process is released from the customer's control room
- The system includes an overfill safety device
- The CPU includes a PLC system
- Standard design is fitted with the D2000 carbon steel swivel joint with hardened ball race
Â
Materials and Technical Data:
Size:
DN 100, 80, 50
Materials:
Carbon steel
Stainless steel
Aluminum
Seals:
NBR
PTFE
EPDM
Viton
FEP
Temperature Range:
-15°C to +50°CÂ
-50° C to +150° C
Â
Various dimensions, materials, temperature ranges and accessories on request.
Â
Design:
- Customer specific design
- Meets highest hygienic and safety requirements
- Low cost operation due to automation
- Environmentally friendly
- EMCO-high performance swivel joints
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Aprende Más
Piggable Loading Arm
Emco Wheaton Piggable Loading Arms are used for applications where pigging the loading arm is required after the loading process
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Aprende Más
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Aprende Más
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Aprende Más
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más
Features
The system can run hydraulically or electrically. The correct connection will be supervised by a Connection Detection System which is works with a proximity switch.
The filling process will be released from the customer's control room. Overfill of the tank is prevented by an Overfill Safety Device. The CPU includes a PLC (Programmable Logic Controller) system.
Specifications
- Chemical applications
- System can be run hydraulically or electrically
- Correct connection is supervised by a connection detection system using a proximity switch
- Filling process is released from the customer's control room
- The system includes an overfill safety device
- The CPU includes a PLC system
- Standard design is fitted with the D2000 carbon steel swivel joint with hardened ball race
Â
Materials and Technical Data:
Size:
DN 100, 80, 50
Materials:
Carbon steel
Stainless steel
Aluminum
Seals:
NBR
PTFE
EPDM
Viton
FEP
Temperature Range:
-15°C to +50°CÂ
-50° C to +150° C
Â
Various dimensions, materials, temperature ranges and accessories on request.
Â
Design:
- Customer specific design
- Meets highest hygienic and safety requirements
- Low cost operation due to automation
- Environmentally friendly
- EMCO-high performance swivel joints
Related Products
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Aprende Más
Piggable Loading Arm
Emco Wheaton Piggable Loading Arms are used for applications where pigging the loading arm is required after the loading process
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Aprende Más
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Aprende Más
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Aprende Más
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más