Emergency Break-Away Coupling for Bottom Hose Loading Applications
Emco Wheaton has introduced a TODO break-away coupling incorporating a TTMA (Tank Truck Manufacturers Association) flange, for the bottom loading of road tankers.
The addition of the 4" TTMA TODO break-away to the loading operation of road tankers gives operators peace of mind knowing that if a drive-away incident occurs, the break-away will disconnect and minimize product lost to virtually zero.
Compartir
The API coupler and the loading arm will not be damaged and the break-away has the capability of being re-set on site with no need to buy a new piece of equipment or send the break-away to the manufacturer for re-set.
The TTMA flange break-away can be installed on a wide range of bottom hose loading distribution loading arms.
- Body Material: Cast aluminum Â
- Seal material: Viton / Buna Â
- Working Pressure: 145 PSI / 10 Bar Â
- Test Pressure: 217.5 PSI / 15 Bar Â
- Weight: 24 Lbs / 11 Kg Â
- Overall Length: 14 inch / 35 cm Â
- Reaction force during emergency release:Â 772 Lbs / 350 Kg (at the connection flange of the road tanker)Â Â
- Pin size:Â 3mm (others available on request)
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Aprende Más
Features
The API coupler and the loading arm will not be damaged and the break-away has the capability of being re-set on site with no need to buy a new piece of equipment or send the break-away to the manufacturer for re-set.
The TTMA flange break-away can be installed on a wide range of bottom hose loading distribution loading arms.
Specifications
- Body Material: Cast aluminum Â
- Seal material: Viton / Buna Â
- Working Pressure: 145 PSI / 10 Bar Â
- Test Pressure: 217.5 PSI / 15 Bar Â
- Weight: 24 Lbs / 11 Kg Â
- Overall Length: 14 inch / 35 cm Â
- Reaction force during emergency release:Â 772 Lbs / 350 Kg (at the connection flange of the road tanker)Â Â
- Pin size:Â 3mm (others available on request)
Related Products
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Aprende Más
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Aprende Más
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Aprende Más