Specialty Loading Arms

Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.

Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).

An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.

The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.

Especially designed to load or unload small compartments such as drums or IBC containers. The loading arm has a long reach and is suitable for applications where the manhole or the connection flange cannot be positioned accurately.

Emco Wheaton Piggable Loading Arms are used for applications where pigging the loading arm is required after the loading process

EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.

The E2612 Top Loading Arms are especially designed for loading and unloading of liquefied gases. The arm is connected to the vessel using specialty couplers, providing a fast, safe, and secure connection to the valves of the vessel.

The E2704 rail unloading arm is designed for light oil products, chemicals or high viscose products. It is equipped with a special coupler for the unloading of Russian railcars from underneath. The coupler enables a safe and quick connection, independent to the orientation of the adapter lid.