E2612 Top Loading Arm
 The E2612 Top Loading Arms are especially designed for loading and unloading of liquefied gases. The arm is connected to the vessel using specialty couplers, providing a fast, safe, and secure connection to the valves of the vessel.
For enclosed loading applications the E2612 loading arm is combined with a second recommended Loading arm to transfer vapor.
• The Product Loading arm is designed with two end pipes for unloading (bull horn design).
• Vapour return arm with one end pipe allows another use of unloading the vessel under pressure.
Share
Sizes:
- Loading Arm: DN 100, 80
- Drop Tube: DN 50, 40
Materials:
-
 Low temp. carbon steel
-
Carbon steel
-
Stainless steel
Temperature Design:
- -54°C / +100°C
Seals:
- PTFE
- FVMQ
Design:
- For liquid gas
- For loading and unloading of Railcars
- Easy handling
- Low maintenance
- Long life
- Environmentally friendly
- EMCO-high performance swivel joints
- The temperature ranges can be varied, depending on the material and product application
Drum Filling Loading Arm
Especially designed to load or unload small compartments such as drums or IBC containers. The loading arm has a long reach and is suitable for applications where the manhole or the connection flange cannot be positioned accurately.
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Learn More
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Learn More
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Learn More
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Learn More
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Learn More
Specifications
Sizes:
- Loading Arm: DN 100, 80
- Drop Tube: DN 50, 40
Materials:
-
 Low temp. carbon steel
-
Carbon steel
-
Stainless steel
Temperature Design:
- -54°C / +100°C
Seals:
- PTFE
- FVMQ
Design:
- For liquid gas
- For loading and unloading of Railcars
- Easy handling
- Low maintenance
- Long life
- Environmentally friendly
- EMCO-high performance swivel joints
- The temperature ranges can be varied, depending on the material and product application
Related Products
Drum Filling Loading Arm
Especially designed to load or unload small compartments such as drums or IBC containers. The loading arm has a long reach and is suitable for applications where the manhole or the connection flange cannot be positioned accurately.
Toxic Loading Arm
EMCO Wheaton’s Toxic Loading Arms are designed for the safe and reliable handling of highly aggressive and dangerous product where a superior level of safety is required.
Learn More
Jacket Heated Tube
The Jacket Heated Drop Tube is designed for on spot top loading applications of highly viscous product, especially wax.
Learn More
PTFE lined Loading & Unloading Arms | Emco Wheaton
Especially designed for loading/unloading of acids and caustics (e.g. 33 % hydrochloric acid, 30 % sulphuric acid etc.).
Learn More
Spot Loading System | Emco Wheaton
An automatic loading system with manhole detection. It comes with our carbon steel swivel joint which has a hardened ball race way to provide a long service life.
Learn More
Floating Suctions
Our Floating Suctions come in a range of designs to suit buried, above ground, semi-buried and vertical tanks as well as for use with articulated drainage units with a floating ceiling/roof.
Learn More