Twin Track Swivel Joint - D1010
The D1010 is the standard swivel joint with two ball tracks. It is usually used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished, giving the swivel joint a high degree of load capacity and long service life, even under extreme loads.
Share
The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
The sealing surfaces are plated with stainless steel and precision-finished to prevent corrosion, ensuring that the seal that slides along these sealing surfaces is not damaged and will seal perfectly.
The D1010 swivel joint, made of a special aluminum alloy, is not supplied with hardened ball tracks due to material characteristics, therefore it is only suitable for normal loads. Aluminum swivel joints have no specially plated seal faces due to the chosen alloy.
The D1010 swivel joint can be relubricated via grease nipples. If required, the balls can be removed and replaced by first removing the ball track plugs.
Normal attitude horizontal or vertical.
Material:
- Carbon steel, low temperature steel or aluminum alloy
Seal material:
- Buna N, Viton, PTFE, Perbunan
Allowable internal pressure (gauge pressure):
- Operational: 10 bar to 25 bar (dependent on size/material/seal material)
 - Test pressure: 15 bar to 37.5 bar (dependent on size/material/seal material)
Allowable temperature range:
- -50° C to +200° C (dependent on size/material/seal material)
Weight:
- DN 150 - carbon steel/low temperature steel - 34 kg
- DN 200 - carbon steel/low temperature steel - 55 kg
- DN 250 - carbon steel/low temperature steel - 75 kg
- DN 300 - carbon steel/low temperature steel - 127 kg
- DN 400 - carbon steel/low temperature steel - 175 kg
- DN 500 - carbon steel/low temperature steel - 238 kg
- DN 150 - aluminum - 14 kg
- DN 200 - aluminum - 20 kg
- DN 250 - aluminum - 29 kg
- DN 300 - aluminum - 38 kg
- DN 150 - carbon steel and low temperature steel
- DN 200 - carbon steel and low temperature steel
- DN 250 - carbon steel and low temperature steelÂ
- DN 300 - carbon steel and low temperature steelÂ
- DN 400 - carbon steel and low temperature steelÂ
- DN 500 - carbon steel and low temperature steelÂ
- DN 150 - aluminum
- DN 200 - aluminum
- DN 250 - aluminum
- DN 300 - aluminum
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Cryogenic Swivel Joints
The swivel joints are the heart of our marine loading arms and allow them to adapt to ships movements. They are key articulations for transporting liquefied natural gas, inserted between two pieces of equipment.
Learn More
Features
The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
The sealing surfaces are plated with stainless steel and precision-finished to prevent corrosion, ensuring that the seal that slides along these sealing surfaces is not damaged and will seal perfectly.
The D1010 swivel joint, made of a special aluminum alloy, is not supplied with hardened ball tracks due to material characteristics, therefore it is only suitable for normal loads. Aluminum swivel joints have no specially plated seal faces due to the chosen alloy.
The D1010 swivel joint can be relubricated via grease nipples. If required, the balls can be removed and replaced by first removing the ball track plugs.
Normal attitude horizontal or vertical.
Specifications
Material:
- Carbon steel, low temperature steel or aluminum alloy
Seal material:
- Buna N, Viton, PTFE, Perbunan
Allowable internal pressure (gauge pressure):
- Operational: 10 bar to 25 bar (dependent on size/material/seal material)
 - Test pressure: 15 bar to 37.5 bar (dependent on size/material/seal material)
Allowable temperature range:
- -50° C to +200° C (dependent on size/material/seal material)
Weight:
- DN 150 - carbon steel/low temperature steel - 34 kg
- DN 200 - carbon steel/low temperature steel - 55 kg
- DN 250 - carbon steel/low temperature steel - 75 kg
- DN 300 - carbon steel/low temperature steel - 127 kg
- DN 400 - carbon steel/low temperature steel - 175 kg
- DN 500 - carbon steel/low temperature steel - 238 kg
- DN 150 - aluminum - 14 kg
- DN 200 - aluminum - 20 kg
- DN 250 - aluminum - 29 kg
- DN 300 - aluminum - 38 kg
Variants
- DN 150 - carbon steel and low temperature steel
- DN 200 - carbon steel and low temperature steel
- DN 250 - carbon steel and low temperature steelÂ
- DN 300 - carbon steel and low temperature steelÂ
- DN 400 - carbon steel and low temperature steelÂ
- DN 500 - carbon steel and low temperature steelÂ
- DN 150 - aluminum
- DN 200 - aluminum
- DN 250 - aluminum
- DN 300 - aluminum
Related Products
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
PTFE Swivel Joint
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Cryogenic Swivel Joints
The swivel joints are the heart of our marine loading arms and allow them to adapt to ships movements. They are key articulations for transporting liquefied natural gas, inserted between two pieces of equipment.
Learn More