Marine Loading Arm
Our B0030 Marine Loading Arm is preferred when loading / unloading sea-going tanker ships and its capability has been proven with many years of trouble free operation world-wide.
The B0030 includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all manoeuvring and connecting positions.
Share
The self-supporting design provides not only high safety standards for easy operation, but also lowest possible jetty loads which minimizes the cost for the jetty itself.
DESIGN
- Fully balanced with independent counterweights for inboard and outboard arm
- Self-supporting system
- Less manpower due to low weight
- Swivel joints either welded-in or flanged
- For transfer of mineral oil, chemicals and Liquified Petroleum Gas (LPG)
- Seals available in Buna-N, Viton, PTFE or other specific materials
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manualquick coupler
- Insulation flange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
Marine Loading Arm
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading Arm
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading - Hydraulic QC/DC Coupler for LNG
This variant of our hydraulic QC/DC coupler is specifically designed for the transfer of LNG. High-strength alloy construction ensures infallible performance in temperatures as low as -200°C.
Learn More
Swivel Joints
Our swivel joints are used for transporting a variety of gasses and fluids in loading arms.
Learn More
Features
The self-supporting design provides not only high safety standards for easy operation, but also lowest possible jetty loads which minimizes the cost for the jetty itself.
DESIGN
- Fully balanced with independent counterweights for inboard and outboard arm
- Self-supporting system
- Less manpower due to low weight
- Swivel joints either welded-in or flanged
- For transfer of mineral oil, chemicals and Liquified Petroleum Gas (LPG)
- Seals available in Buna-N, Viton, PTFE or other specific materials
Specifications
Accessories
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manualquick coupler
- Insulation flange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
Related Products
Marine Loading Arm
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading Arm
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading - Hydraulic QC/DC Coupler for LNG
This variant of our hydraulic QC/DC coupler is specifically designed for the transfer of LNG. High-strength alloy construction ensures infallible performance in temperatures as low as -200°C.
Learn More
Swivel Joints
Our swivel joints are used for transporting a variety of gasses and fluids in loading arms.
Learn More