PTFE Swivel Joint - D2000
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products.
Share
The ball tracks are encapsulated by two O-rings, neither dirt from the outside nor product from within (in case of leakage) can reach the ball track.Â
Should the main seal fail, leakage is indicated through the leak detection port. This port is PTFE sleeved, thus contact of product with carbon steel components is prevented.
The bearing module with its hardened ball race and the specially designed seals guarantees a reliable and long life working swivel joint. The bearing module and the seals can be easily replaced. All carbon steel parts could be made of stainless steel.
The D2000 - PTFE swivel joint is equipped with special flanges. The connection flanges for the pipes are included in the swivel joint order. These flanges are welded to the pipes and then PTFE lined as an assembly.
Material:
- Carbon steel
- PTFE lined
Seal Material:
- PTFE
Allowable internal pressure (gauge pressure):
- Operational:
- 10 bar
- Test pressure:
- 15 bar
Allowable temperature range:
- -10° C to +150° C (temperature range may be restricted due to seal material)
Weight:
- DN 50 - 9 kg
- DN 80 - 12 kg
- DN 100 - 18 kg
- DN 150 - on request
- DN 200 - on request
- DN 50
- DN 80
- DN 100
- DN 150
- DN 200
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Learn More
SWIVEL JOINTS
Swivel joints are designed to minimise torque stress on a hose while also permitting free movement.
Learn More
Features
The ball tracks are encapsulated by two O-rings, neither dirt from the outside nor product from within (in case of leakage) can reach the ball track.Â
Should the main seal fail, leakage is indicated through the leak detection port. This port is PTFE sleeved, thus contact of product with carbon steel components is prevented.
The bearing module with its hardened ball race and the specially designed seals guarantees a reliable and long life working swivel joint. The bearing module and the seals can be easily replaced. All carbon steel parts could be made of stainless steel.
The D2000 - PTFE swivel joint is equipped with special flanges. The connection flanges for the pipes are included in the swivel joint order. These flanges are welded to the pipes and then PTFE lined as an assembly.
Specifications
Material:
- Carbon steel
- PTFE lined
Seal Material:
- PTFE
Allowable internal pressure (gauge pressure):
- Operational:
- 10 bar
- Test pressure:
- 15 bar
Allowable temperature range:
- -10° C to +150° C (temperature range may be restricted due to seal material)
Weight:
- DN 50 - 9 kg
- DN 80 - 12 kg
- DN 100 - 18 kg
- DN 150 - on request
- DN 200 - on request
Variants
- DN 50
- DN 80
- DN 100
- DN 150
- DN 200
Related Products
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Single Track Swivel Joint - D0002
The D0002 series forms the basis for our range. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D1133
Our D1133 is a variant of the basic D0002. It is the ideal articulation for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Twin Track Swivel Joint - D1010
The D1010 is used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. The swivel joint has a high degree of load capacity and long service life, even under extreme loads.
Learn More
SWIVEL JOINTS
Swivel joints are designed to minimise torque stress on a hose while also permitting free movement.
Learn More