Bottom Transfer Loading Arms
Bottom transfer loaders are especially designed to load products where for applications where a vehicle cannot be accurately spotted.
They are also especially designed to load mineral oil or chemical products and is suitable for the bottom loading/unloading of road or rail tankers. They are suitable for the bottom loading/unloading of road or rail tankers with flange connection or coupling.
For connection pipes with high weight, the loading arm can be designed with a special 6 D2000 swivel configuration with parallel bar and gas spring for balancing the weight of the connection pipe.
Share
Because of the robust and high quality design of the swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.
Easy to adjust, super smooth action spring cylinder balance and heavy duty capacity swivel joints enable these arms to reach further without the need for additional support. The spring cylinder balance has up to 50 deg of vertical movement for easy to handle alignment and out of the way parking.
A variety of seal configurations and elastomers ensure long life performance for each specific application.
Suggested applications & mediums: Road & Rail Bottom Loading & Unloading. Oil, Chemical Products
Europe
Sizes:
- 2” / 3”/ 4”
Materials of Arm Construction:
- Carbon steel
- European materials
- Stainless steel
- Low temp carbon steel
Accessories:
- Ball valve
- Parallel bar
- Gas spring device
- Emergency Release System (Collar release or break stud type)
- Orientation Switch
- Stand Post
- Locking device (Parking position)
- Junction Box
- Relief line and / or purge line
- Heating Systems
- Other accessories available on request)
ROM:
- +20° to -30°
Seals:
- Viton
- Perbunan
- PTFE
- FEP
- EPDM
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- 16 bar to 40 bar
Design Temperature:
- max. -50°C / +250°C
(Exact Temperature ranges can varied in regards
to material and Product application)
Suggested Applications/Mediums:
- Truck Bottom Loading
- Railcar bottom loading
- Diesel / Gasoline
- Chemical
- Propane
- Oil
Advanced function: the loading arm can be designed for cryogenic application such as LNG
EW Germany Part Number:
- E2824 See Brochure
- E2839
US
Sizes:
- 2" - 6"
Materials of Arm Construction:
- Carbon steel
- Aluminum outboard
- Low temp carbon steel
Materials of Optional Accessories:
- D2000 Swivels (Hi Temp, all SST, LT, etc)
- Cast Aluminum outboard swivel
- Aluminum D-Handle
- Alum API Coupler
- TODO-Matic / TODO-Gas Couplers/Adapters
- Hammer union
- Gas Strut
- Parallel Device
- TODO Breakaway
- Ball valve
- Stand Post w/ parking assist
ROM:
- +20° to -30°
Seals:
- Viton
- Buna/Nitrile
- PTFE
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- Based on flanges and accessories
- Typical – 150 psi
- *Higher pressure ratings available but cannot exceed 580 PSI
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical Range: 5F to 266 F
- Broader temperature ranges available
Suggested Applications/Mediums:
- Truck Bottom Loading
- Railcar bottom loading
- Diesel / Gasoline
- Chemical
- Propane
- Oil
EW US Part Number:
- E2033
- E2386 (stand post design)
Vapour Recovery System - J0550
Our J0550 self sealing Vapor Coupler is specifically designed to allow high transfer rates of vapor to flow freely from the tank truck back to the loading rack.
Learn More
API Coupler - J0452
The most advanced coupler range available in the global market today. Our newly launched J0452 has been engineered as a direct replacement to the K2/K2P to be the SNAP ON / SNAP OFF coupler of choice.
Learn More
CAMSEC Coupler
Superior sealing technology, with lowest leakage on disconnect in its class. It is maintenance friendly and has a wide range of spare kits available. The Camsec Coupler is ATEX certified and is available with a French metrology approved check valve.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
API Coupler for filling and unloading - J0451
Lightweight and maintenance friendly, allowing in-situ nose seal replacement. It includes a bevelled lip for ease of operation and provides better load distribution.
Learn More
API Coupler for filling and unloading - J0451
Lightweight and maintenance friendly, allowing in-situ nose seal replacement. It includes a bevelled lip for ease of operation and provides better load distribution.
Learn More
API Coupler - J0452
The most advanced coupler range available in the global market today. Our newly launched J0452 has been engineered as a direct replacement to the K2/K2P to be the SNAP ON / SNAP OFF coupler of choice.
Learn More
CAMSEC Coupler
Superior sealing technology, with lowest leakage on disconnect in its class. It is maintenance friendly and has a wide range of spare kits available. The Camsec Coupler is ATEX certified and is available with a French metrology approved check valve.
Learn More
Vapour Recovery System - J0550
Our J0550 self sealing Vapor Coupler is specifically designed to allow high transfer rates of vapor to flow freely from the tank truck back to the loading rack.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
TODO-MATIC
TODO-MATIC drybreak couplings are the product of over 30 years’ experience handling oil, gas and petrochemicals. Operator safety is our top priority.
Learn More
TODO-GAS Coupling for LPG Fittings
TODO-GAS couplings are designed to simplify LPG fitting and transfer in both liquid and vapour phases.
Learn More
Features
Because of the robust and high quality design of the swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.
Easy to adjust, super smooth action spring cylinder balance and heavy duty capacity swivel joints enable these arms to reach further without the need for additional support. The spring cylinder balance has up to 50 deg of vertical movement for easy to handle alignment and out of the way parking.
A variety of seal configurations and elastomers ensure long life performance for each specific application.
Suggested applications & mediums: Road & Rail Bottom Loading & Unloading. Oil, Chemical Products
Specifications
Europe
Sizes:
- 2” / 3”/ 4”
Materials of Arm Construction:
- Carbon steel
- European materials
- Stainless steel
- Low temp carbon steel
Accessories:
- Ball valve
- Parallel bar
- Gas spring device
- Emergency Release System (Collar release or break stud type)
- Orientation Switch
- Stand Post
- Locking device (Parking position)
- Junction Box
- Relief line and / or purge line
- Heating Systems
- Other accessories available on request)
ROM:
- +20° to -30°
Seals:
- Viton
- Perbunan
- PTFE
- FEP
- EPDM
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- 16 bar to 40 bar
Design Temperature:
- max. -50°C / +250°C
(Exact Temperature ranges can varied in regards
to material and Product application)
Suggested Applications/Mediums:
- Truck Bottom Loading
- Railcar bottom loading
- Diesel / Gasoline
- Chemical
- Propane
- Oil
Advanced function: the loading arm can be designed for cryogenic application such as LNG
EW Germany Part Number:
- E2824 See Brochure
- E2839
US
Sizes:
- 2" - 6"
Materials of Arm Construction:
- Carbon steel
- Aluminum outboard
- Low temp carbon steel
Materials of Optional Accessories:
- D2000 Swivels (Hi Temp, all SST, LT, etc)
- Cast Aluminum outboard swivel
- Aluminum D-Handle
- Alum API Coupler
- TODO-Matic / TODO-Gas Couplers/Adapters
- Hammer union
- Gas Strut
- Parallel Device
- TODO Breakaway
- Ball valve
- Stand Post w/ parking assist
ROM:
- +20° to -30°
Seals:
- Viton
- Buna/Nitrile
- PTFE
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- Based on flanges and accessories
- Typical – 150 psi
- *Higher pressure ratings available but cannot exceed 580 PSI
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical Range: 5F to 266 F
- Broader temperature ranges available
Suggested Applications/Mediums:
- Truck Bottom Loading
- Railcar bottom loading
- Diesel / Gasoline
- Chemical
- Propane
- Oil
EW US Part Number:
- E2033
- E2386 (stand post design)
Accessories
Vapour Recovery System - J0550
Our J0550 self sealing Vapor Coupler is specifically designed to allow high transfer rates of vapor to flow freely from the tank truck back to the loading rack.
Learn More
API Coupler - J0452
The most advanced coupler range available in the global market today. Our newly launched J0452 has been engineered as a direct replacement to the K2/K2P to be the SNAP ON / SNAP OFF coupler of choice.
Learn More
CAMSEC Coupler
Superior sealing technology, with lowest leakage on disconnect in its class. It is maintenance friendly and has a wide range of spare kits available. The Camsec Coupler is ATEX certified and is available with a French metrology approved check valve.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
API Coupler for filling and unloading - J0451
Lightweight and maintenance friendly, allowing in-situ nose seal replacement. It includes a bevelled lip for ease of operation and provides better load distribution.
Learn More
API Coupler for filling and unloading - J0451
Lightweight and maintenance friendly, allowing in-situ nose seal replacement. It includes a bevelled lip for ease of operation and provides better load distribution.
Learn More
API Coupler - J0452
The most advanced coupler range available in the global market today. Our newly launched J0452 has been engineered as a direct replacement to the K2/K2P to be the SNAP ON / SNAP OFF coupler of choice.
Learn More
CAMSEC Coupler
Superior sealing technology, with lowest leakage on disconnect in its class. It is maintenance friendly and has a wide range of spare kits available. The Camsec Coupler is ATEX certified and is available with a French metrology approved check valve.
Learn More
Vapour Recovery System - J0550
Our J0550 self sealing Vapor Coupler is specifically designed to allow high transfer rates of vapor to flow freely from the tank truck back to the loading rack.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
TODO-MATIC
TODO-MATIC drybreak couplings are the product of over 30 years’ experience handling oil, gas and petrochemicals. Operator safety is our top priority.
Learn More
TODO-GAS Coupling for LPG Fittings
TODO-GAS couplings are designed to simplify LPG fitting and transfer in both liquid and vapour phases.
Learn More