Marine Loading Arm - B0030
Our B0030 Marine Loading Arm is preferred when loading / unloading sea-going tanker ships and its capability has been proven with many years of trouble free operation world-wide.
The B0030 includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all manoeuvring and connecting positions.
Share
The self-supporting design provides not only high safety standards for easy operation, but also lowest possible jetty loads which minimizes the cost for the jetty itself.
DESIGN
- Fully balanced with independent counterweights for inboard and outboard arm
- Self-supporting system
- Less manpower due to low weight
- Swivel joints either welded-in or flanged
- For transfer of mineral oil, chemicals and Liquified Petroleum Gas (LPG)
- Seals available in Buna-N, Viton, PTFE or other specific materials
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manualquick coupler
- Insulation flange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading - Hydraulic QC/DC Coupler for LNG
This variant of our hydraulic QC/DC coupler is specifically designed for the transfer of LNG. High-strength alloy construction ensures infallible performance in temperatures as low as -200°C.
Learn More
Swivel Joints
Our swivel joints are used for transporting a variety of gasses and fluids in loading arms.
Learn More
Features
The self-supporting design provides not only high safety standards for easy operation, but also lowest possible jetty loads which minimizes the cost for the jetty itself.
DESIGN
- Fully balanced with independent counterweights for inboard and outboard arm
- Self-supporting system
- Less manpower due to low weight
- Swivel joints either welded-in or flanged
- For transfer of mineral oil, chemicals and Liquified Petroleum Gas (LPG)
- Seals available in Buna-N, Viton, PTFE or other specific materials
Specifications
Accessories
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manualquick coupler
- Insulation flange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
Related Products
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Learn More
Marine Loading - Hydraulic QC/DC Coupler for LNG
This variant of our hydraulic QC/DC coupler is specifically designed for the transfer of LNG. High-strength alloy construction ensures infallible performance in temperatures as low as -200°C.
Learn More
Swivel Joints
Our swivel joints are used for transporting a variety of gasses and fluids in loading arms.
Learn More