Variable Reach Loader
Our Variable Reach Top Loader is especially designed for the top loading of road or rail tankers suitable for applications where the manhole cannot be positioned accurately. Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Also known as a Pantograph and Scissor arm, the Variable Reach Loader is recommended for medium reach applications less than 11 feet.
This loading arm can be used for petroleum, chemical, and mineral oil applications and is available with or without a load valve.
Because of the robust and high quality design of the swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.
Share
EUROPE
Sizes:
- DN 50-100
Material of Arm Construction:
- Carbon Steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
Optional Accessories:
- D2000 Swivels
- Cast aluminum apex swivels
- Aluminum load valves
- Vacuum Breaker
- Tee Deflector, SST & Alum
- Level sensor
- Datum Bracket
ROM:
- +60° to -45°
Seals:
- Viton
- Buna/Nitrile
- PTFE & Equivalents
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- Based on flanges and accessories.
- Typical is 16 Bar
- *Higher pressure ratings available but cannot exceed 40 barg
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical range: -10C to +50C
- Broader temperature ranges available
EW Germany Part Number:
- E2806
- E2807
- E2814
- E2815
Pipe size:
- 2” through 12”
Materials:
- Carbon steel
- Carbon Steel/Aluminum
- Stainless steel
Standard vertical range of motion for the loading arm:
- 55° (park position) to -20° (load position)
Maximum vertical range of movement:
- Up to 95° with spring cylinders.
Suggested Applications:
- Splash Loading
- Mineral Oil
- Tight seal / vapor recovery
- Chemical / Acids
- Manholes with mis-spotting issues
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
TODO-MATIC
Dry-break coupling available in 1-6” sizes. Ideal for transferral of oil, gas and petrochemicals. Minimal residual loss and zero leakage.
Learn More
TODO-GAS
Available in 1-3” sizes, these units are ideal for the safe transfer of LPG in liquid and vapour phases.
Learn More
NGX BreakAway Coupling
The NGX breakaway coupling designed to eliminate spillages and damage to equipment when operators fail to disengage a line.
Learn More
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Learn More
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
E2630 Top Loading Arm with Vapor Recovery
Loading arms with vapor return lines are ideal for use with hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Learn More
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Learn More
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More
Specifications
EUROPE
Sizes:
- DN 50-100
Material of Arm Construction:
- Carbon Steel
- Stainless Steel
- Low Temp Carbon Steel
- Aluminum
Optional Accessories:
- D2000 Swivels
- Cast aluminum apex swivels
- Aluminum load valves
- Vacuum Breaker
- Tee Deflector, SST & Alum
- Level sensor
- Datum Bracket
ROM:
- +60° to -45°
Seals:
- Viton
- Buna/Nitrile
- PTFE & Equivalents
- *More options upon request
Balancing Method:
- Spring Cylinder
Design Pressure:
- Based on flanges and accessories.
- Typical is 16 Bar
- *Higher pressure ratings available but cannot exceed 40 barg
Design Temperature:
- Based on piping/flanges/seals/accessories
- Typical range: -10C to +50C
- Broader temperature ranges available
EW Germany Part Number:
- E2806
- E2807
- E2814
- E2815
Pipe size:
- 2” through 12”
Materials:
- Carbon steel
- Carbon Steel/Aluminum
- Stainless steel
Standard vertical range of motion for the loading arm:
- 55° (park position) to -20° (load position)
Maximum vertical range of movement:
- Up to 95° with spring cylinders.
Configuration
Applications
Suggested Applications:
- Splash Loading
- Mineral Oil
- Tight seal / vapor recovery
- Chemical / Acids
- Manholes with mis-spotting issues
Accessories
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More
Swivel Joint for Chemical Industry - D2000
The use of our new D2000 optimizes nearly all liquid transports. Whether in the mineral oil, food or chemical industry, the D2000 meets the highest standards.
Learn More
TODO-MATIC
Dry-break coupling available in 1-6” sizes. Ideal for transferral of oil, gas and petrochemicals. Minimal residual loss and zero leakage.
Learn More
TODO-GAS
Available in 1-3” sizes, these units are ideal for the safe transfer of LPG in liquid and vapour phases.
Learn More
NGX BreakAway Coupling
The NGX breakaway coupling designed to eliminate spillages and damage to equipment when operators fail to disengage a line.
Learn More
Related Products
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Learn More
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
E2630 Top Loading Arm with Vapor Recovery
Loading arms with vapor return lines are ideal for use with hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Fixed Reach Loading Arms | Emco Wheaton
Designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required.
Learn More
Long Reach Loading Arm with Supported Boom | Emco Wheaton
Easy to adjust, super smooth spring loaded cylinder balanced, heavy duty swivel joints and a custom boom support enable these arms to reach even further than our unsupported boom loader.
Learn More
Long Reach Loading Arm with Unsupported | Emco Wheaton
The Long Reach Loader is specifically designed for top loading of multiple-compartment road or rail tankers.
Learn More
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Downloads
Parallel Loading Arm | Emco Wheaton
E2632 Parallel Loading Arms with vapor return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
Learn More
Variable Reach Loader | Emco Wheaton
Versatility of reach makes the Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.
Learn More
Top Unloading Arm for Rail Cars | Emco Wheaton
The E2710 Top Unloading Arm with Heatin Line is especially designed to heat up and unload frozen products. It is suitable for the top loading / unloading of rail tankers.
Learn More