Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Share
CaracterÃsticas
The PMS is a stand alone unit and works in the following way:
- A pendulum potentiometer located on the inboard arm measures the angle of the inboard arm with respect to vertical.
- A pendulum potentiometer located on the outboard arm measures the angle of the outboard arm with respect to vertical.
- A direct coupled potentiometer located at the base riser swivel joint measures the slewing angle.
- Information from the potentiometers is relayed through a PC hooked to the local control panel.
Features include:
- Remote maintenance
- Display redirection via TCP/IP or modem
Marine Loading Arm - B0030
Includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all maneuvering and connecting positions.
Learn More
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Presupuesto
- Scaled display of the loading arms in side and top view
- Display of all loading arms installed on one jetty at the same time (Multi Arm Display)
- Multi Arm Display switching between the jetties
- Display of one single loading arm (Single Arm Display)
- Auto activating of Single Arm Display on alarm
- Alarm Beep and flashing angle indicator on alarm
- Colored alarm ranges
- Operator calibration mode
- Display of percentage of actual position relative to the entire envelope
- Display of actual position in X-, Y- and Z-axis
- History and trend overlay
- Saving of history and event data in CSV-format (Excel compatible)
- Daily history and event files
- Angle sensor diagnostics
- Status indication of the angle sensor data transfer
- Setup menus for the project configuration
Features
CaracterÃsticas
The PMS is a stand alone unit and works in the following way:
- A pendulum potentiometer located on the inboard arm measures the angle of the inboard arm with respect to vertical.
- A pendulum potentiometer located on the outboard arm measures the angle of the outboard arm with respect to vertical.
- A direct coupled potentiometer located at the base riser swivel joint measures the slewing angle.
- Information from the potentiometers is relayed through a PC hooked to the local control panel.
Features include:
- Remote maintenance
- Display redirection via TCP/IP or modem
Related Products
Marine Loading Arm - B0030
Includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all maneuvering and connecting positions.
Learn More
Marine Loading Arm - B0300
Designed for any application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -168 °C, piggable systems and PTFE-lining.
Learn More
Specifications
Presupuesto
- Scaled display of the loading arms in side and top view
- Display of all loading arms installed on one jetty at the same time (Multi Arm Display)
- Multi Arm Display switching between the jetties
- Display of one single loading arm (Single Arm Display)
- Auto activating of Single Arm Display on alarm
- Alarm Beep and flashing angle indicator on alarm
- Colored alarm ranges
- Operator calibration mode
- Display of percentage of actual position relative to the entire envelope
- Display of actual position in X-, Y- and Z-axis
- History and trend overlay
- Saving of history and event data in CSV-format (Excel compatible)
- Daily history and event files
- Angle sensor diagnostics
- Status indication of the angle sensor data transfer
- Setup menus for the project configuration